Print on Glass - How to Translate a Monochrome Photograph Onto Glass

Материал из WikiSyktSU
Перейти к: навигация, поиск

At one time if it was thought unattainable a picture printed over a glass surface. These days, technology comes up to now that art may be translated onto glass too. There's a distinctive dimension and depth with a grayscale photograph or image that is printed for this a surface. Actually print on glass is not an difficult technique at all especially if you understand the basics of printing on a photo paper. A few extra steps are all you will want to get a picture printed onto a glass surface.

First, you will need a good white and black photograph which has the right resolution and clarity. For this, you may use a non-digital camera that's been full of a grayscale film; the top would be a 35mm camera though the speed in the film may range which range from ISO 200 to 800. Another task is to pick the best glass surface for that printing process. Pick the dimensions including thickness with respect to the image you have in your mind. Clean the glass surface quite well by using a cleaner and paper towel. If you use old glass, ensure it is spotless before continuing with all the process.

After washing the surface well, you need to coat it having a single, thin layer of matte medium; this can be basically a liquid that is utilized by artists to diminish the glossy effects plus increase the texture with the surface. This helps in better adhesion with the film on top of the glass surface. After applying the matte medium, loose time waiting for a half-hour to an hour and make sure how the surface is entirely dry before proceeding further. To print on glass, you need to also have a dark room. The glass surface should be coated again secretly in which the photograph will likely be printed having a photo emulsion liquid. How's that for left for 15 to 20 minutes to dry.

The identical process and equipments that you employ to print onto photo paper can be produced use within printing on a glass surface. A great idea is out the enlarger and phone printer and keep to the same steps to obtain the foto op plexiglas. Because the print medium is much thicker, time taken for that photograph to get printed is much more than usual. But have patience until the entire process gets over allowing you to have a perfect replica on the glass surface.